Water Damage And Mold Restoration – The Facts? It is the process of repairing a house or property to its pre loss condition. Damage to the property could be because of an overflow, flood or any other water damage event. The water damage restoration process involves several key procedures like loss assessment, categorization based on the water contamination levels, decontaminating and drying the structure, monitoring of the process and completion of the process. The two main large certifying bodies, namely the IICRC (Institute of Inspection, Cleaning and Restoration Certification) and the RIA (Restoration Industry Association) that recommends standards for water damage and mold restoration. The S500 damage as a result of water guide is the benchmark tool which is used by companies specializing in restoration of water damage.
Loss Assessment and Categorization – Loss evaluation is the foremost and the most crucial part of water damage and mold restoration. The assessment needs to be correct in order that a suitable response can be utilized. In restorating the harm caused by water, technicians and the insurance companies must work together and know very well what is damaged and the way to restoring the injury. Identifying the source in the damage, documentation of damage, and accurate estimates are mandatory to get a proper water damage and mold restoration. Categorization relies on the contamination amounts of the water source. The categories are listed below
Category 1 – This can be water from clean sources like pipes, sinks and toilets without faeces or urine.
Category 2 – This can be water which has some contaminants like water coming from a dishwasher, washing machine or toilet with urine.
Category 3 – This really is water which is highly unsanitary and is capable of doing causing illness or death if ingested. Sewage water, water from toilet with faeces, standing water with microbial growth and floodwater are a handful of examples.
Decontamination and Drying – After the evaluation is done, the process of drying and decontaminating begins at the site. Based on the extent of damage, damage caused because of water can be classified into 4 types. Class 1 Damage- When loss is fixed to some small area and much less water has been absorbed by materials. This brings about slow evaporation rate. Class 2 Damage – If the damage would be to the whole room and carpet area. Class 3 Damage – Once the entire area is saturated with water and Class 4 Damage – when there are numerous deep saturation pockets. Decontamination and drying is a key stage in Water damage restoration and equipments like blowers, dehumidifiers, scrubbers and subfloor drying equipments have to be used. Decontamination must be done if contamination has become detected in the region. Decontamination may be completed for the complete area or in specific pockets where contamination has become detected.
Monitoring and Completion – Monitoring the restoration procedure of damage caused because of damage is crucial to achieve the desired results. One has to be proactive throughout the monitoring process. Checking if the drying equipment is setup properly, assessing when the personnel involved are qualified for the task and checking if the equipments are in working order inwtsy all area of the monitoring process. Necessary steps are to be taken if something wrong is spotted during the monitoring process. The complete procedure for water damage and mold restoration would be classified as complete only once the humidity, temperature as well as the moisture content is just as per industry standards. Upon completion of the water damage restoration process, the drying equipment can be removed.