This automated optical Fiber tensile screening program is made for operator skill impartial use within creation and lab configurations. Two fundamental design designs enable the consumer to pick between a set up for standard linear Proof screening and with extra mandrels for rotary high strength testing.
The linear version is made for creation Proof screening with causes approximately 22 N. Motor-driven clamps with carefully designed rubber inserts be sure that the SZ Stranding Line is not really ruined in the screening process whilst simultaneously eliminating the necessity for an external air provide. Levels of tugging force, tugging speed and hold time are programmable and conveniently available to the operator with the built in Liquid crystal display touch screen control. Information from assessments can be saved and accessed through the USB dock or Ethernet interface.
Mandrels of the identical style as in NYFORS’ visual Fiber recoaters can be easily mounted on the Proof tester within the rotary high power configuration. The Fiber is wrapped around the two mandrels which support it having a special clamping mechanism. This way greater loads can be employed on the Fiber, enabling breaking power tests under managed conditions.
Changeable clamp positioning facilitates screening with all the highest force amounts as well as screening of short Fiber lengths. The compact and light weight style helps make the tool simple to maneuver in a laboratory environment and to incorporate in a production work bench where space are at reasonably limited. The device is really a lightweight and light-weight instrument ideal for testing the strength of optical fibers as much as 30 N. The machine is designed to fulfill all kinds of programs where a strength check has to be performed.
The device was created using the consumer in mind. The SZ Stranding Line is readily positioned in the carefully guided linear clamps, as well as the screening starts instantly with a “One Touch” go button. The built in microprocessor controls all the important parameters like pulling force, tugging velocity and hold time. This permits for any totally managed check every time.
The device can be linked to another Computer, which enables access to all programmable parameters and configurations. The machine is tailored to stand-on your own use or even to the integration into various subsystems. The machine comes with an substantial capacity for signing and saving details like tugging force, tugging speed and Fiber size as well as other guidelines.
Two recoat injector configurations can be purchased. The PTR307 utilizes a computerized pump to inject the recoat material. The quantity of materials dispensed by the automatic injector is managed by hand using the top-installed “Inject” button or programmed in to the machine using the tablet pc control. The PTR307B comes with a manual recoat shot system that will require an individual to manually dispense the recoat material into the mold cavity; a substitute injector for your PTR307B recoater is available below. Please note that this automated injector is only suitable for high-index recoat materials, as the manual injector works with each reduced- and high- directory recoat material; both are marketed individually listed below. Please contact Tech Support to learn more.
he handbook injector can be installed to compatible Fiber recoaters via the 4-40 anchoring screws on the recoater housing (see photo towards the right). Use a 3/32″ hex key to secure the injector just before use. For connecting the PTRRRM for the recoater mold, tighten up the connector at the end of the green plastic material tubes, then release by way of a 1/4 choose allow for rotation.
The injector comes with a syndication device as well as 2-place choice handle for directing the flow of recoat material. A knurled dispensing attach with the internal plunger behaves as a syringe for your recoat materials. To fill the syringe, point the lever downwards (i.e., towards the recoat bottle), then rotate the knurled dispensing screw counterclockwise till it spins freely to fill up the syringe (shown in the photo to the right). Then, to inject the recoat material into the mold, point the handle horizontally (i.e., dealing with qyjflh knurled attach) and spin the screw clockwise till near the finish from the journey range is achieved. Avoid bottoming the dispenser because this may damage the interior plunger; also take care when re-interesting the threads in order to avoid go across threading the dispensing screw. A number of fill up/inject actions may be needed until air is displaced in the program. Use lens cells plus an acetone or alcohol cleansing solution to gather FTTH Cable Production Line materials that flows from the mold.