Much has been written regarding the compatibility of numerous brands and types of slot cars operating other brands and kinds of monitors. It is relatively well recognized, for example, that almost any analog slot car can work well on a Carrera analog track because Carrera has the widest and deepest slot of some of the significant manufacturers. Alternatively, many Carrera cars will not work well, or at all, on a number of other brands of track since the manual is just too broad or strong to match in some thing like a Scalextric track. While articles happen to be composed concerning the cars compatibility, little continues to be written about track retaining walls or barriers. This study can look comprehensive at tracks, retaining walls, and barriers from Carrera, Ninco, and Scalextric, and in addition show how well they do, or don’t, work when mixing brands.
Firstly, let’s begin with Scalextric track and obstacles, as they are very likely probably the most widely used make of commercial manufactured port vehicle techniques. Scalextric makes a good searching barrier, manufactured from a smooth, pliable plastic that keeps its form well, and can soak up impacts of port vehicle crashes without having physical harm. These barriers can attach to Scalextric Sport monitor in a couple of methods- with small dark clips that affix straight to the bottom of the track, or inserted into grooves and channels specifically for these obstacles on the item shoulder pieces. As the obstacles do match well and relatively stiffly into the dark clips, the clips do not stay attached strongly for the track without having to use adhesives or some other methods of affixing them within a more long term fashion for the Track Fans TV!. Also with a serious effect, either the buffer, or occasionally the complete shoulder area may dislodge from your track. Aesthetically the barriers are incredibly satisfying, and they do little injury to the cars whilst slowing down or stopping them. Nevertheless, they often need to be place back into position right after occurrences.
Carrera at one time provided two various kinds of barriers- a single had been a smooth, flexible rubber that would slip into clips and attach towards the monitor, and was offered in dark or red-colored. These are generally will no longer manufactured. The current Carrera barrier system is made up of red and white striped “candy cane” bit of 3mil PVC that slides into firmly fitting vinyl clips that attach to the bottom of the monitor. The red and white striping matches the pattern found in the border and shoulder joint pieces of Carrera track, and does look suitable on sharp transforms, although much less so on directly parts in which a barrier may be warranted, such as a link. Also, the Pvc material has a tendency to become fragile with time, and can crack and break with successive effects. In addition, it has almost no pliability, and definately will pick up color from wayward vehicles. This has a tendency to add a practical turn to the barrier, however the vehicles will show signs of wear. This system does stay firmly affixed to the track even with serious effects. The strips of PVC can also be easily reduce to custom measures, and one piece can be as long as 4 feet, permitting a continuous appear and feel on a long turn. It is also quite simple to produce your own custom buffer walls by publishing directly to bedding of Pvc material and cutting it into pieces of the proper elevation. This can enable the creation of practical and relatively durable trackside marketing.
Although much less widespread as Carrera and Scalextric, Ninco makes exceptional monitor and barrier products which are almost universally acknowledged as the very best quality mass produced systems. The track has nearly the same size and level as the Carrera, whilst getting the flexibility and appearance from the Scalextric. The obstacles consist of low walls, stone looking walls, and even a wall having a high fence. The Ninco barriers are of the comparable materials for the Scalextric ones, and absorb effect without “buying and selling color”
Now, assume you have a single type of track, but you would like to utilize an additional brand name for any wall structure or buffer. Thankfully, this may not be as complicated or difficult a compatibility problem since it is with the cars. The height of the Carrera Pvc material strips is exactly the same as the height in between the top and base side rails from the Scalextric barrier railings, and it is quite easy to eliminate the Carrera candy-cane strips and change them with Scalextric guardrails. The Carrera fastening system for the Carrera track is quite safe, and also the railings be in location as well or much better making use of the Carrera clips on Carrera track because they do utilizing Scalextric clips on Scalextric track. Measures may be considered a minor issue, but the materials trims effortlessly using a utility blade. Sadly, if you would like utilize the Carrera “chocolate cane” around the Scalextric monitor, the best way to do it well is with an sticky, laying the Carrera pieces within the Scalextric guard rails. Hot stick functions well for this particular, and can be removed relatively easily as well.
The Ninco barriers and wall surfaces are a a single item system, with the clips becoming an element of the wall or barrier area. These affix easily to not only the Ninco track, but the Carrera and Scalextric. In fact, the Ninco products oyalkf to install even more tightly using the Scalextric monitor than on the local monitor. On the Carrera monitor, the elevation in the track is just somewhat higher than the space in between the top and base from the Ninco clips. Nevertheless, it can be produced to match by trimming the edge from the Carrera track very somewhat, nearly unnoticeably across the bottom. Once again, the Carrera chocolate cane can be attached for the Ninco obstacles by using adhesives.